This high-impact plastic enclosure is dust and water resistant but designed to minimise thermal lag
The LogTag Case is specifically designed for LogTag recorder products to allow use in harsh environments. The design of the enclosure minimises the effects of thermal lag caused by additional casing. In general, the enclosure adds about 70% to the reaction time to temperature change for a given environment.
It is not normally necessary when the Logtag is monitoring refrigerators, freezers, vehicles etc.
Not suitable for LogTags with external probes, or for humidity logging models.
|LogTag® Models Supported||Supports all non-External Probe and Humidity products.|
|Storage temperature range||-40°C to +85°C (-40°F to +185°F)|
|Protection rating||IP67 (equivalent to NEMA6) for temperatures 1°C to +40°C (33°F to +104°F)|
|Case material||Clear Polycarbonate|
|Seal Material||Silicon rubber|
|Chemical resistance||In general the polycarbonate material can withstand alcohols and diluted acids well. Problems can occur with hydrocarbons, phenols, esters, ketones and alkalis especially at elevated temperatures.|
|Size||104mm (L- not including lug) x 76.5mm (W – including clips and hinge) x 13mm D|
|T90 thermal performance||With TRIX-8 in 1 m/s air: T90 = to 10 minutes. With TRID30-7x in 1 m/s air: T90 = to 17minutes|